研究業績

学会誌印刷公表論文

2021

    1. D. Yamada, S. Hori, S. Abe, Y. Kumeno, T. Yamazaki, C. Oka, J. Sakurai, and S. Hata, “Examination of Mechanical Properties and Photoelastic Properties of Gel Material for Blood Vessel Mimics“, Journal of Medical Devices, Vol. 15, 031011 (2021), DOI: https://doi.org/10.1115/1.4051516
    2. T. Yamazaki, T. Tomita, K. Uji, H. Kuwata, K. Sano, C. Oka, J. Sakurai, and S. Hata, “Combinatorial synthesis of nanocrystalline FeSiBPCuC–Ni–(Nb,Mo) soft magnetic alloys with high corrosion resistance“, Journal of Non-Crystalline Solids, Vol. 563, 120808 (2021), DOI: https://doi.org/10.1016/j.jnoncrysol.2021.120808
    3. Ryo Morisaki, Takahiro Yamazaki, Chiemi Oka, Junpei Sakurai, Takami Hirai, Tomonori Takahashi, Hiroyuki Tsuji, Noriyasu Ohno, and Seiichi Hata, “Particle-in-cell-Monte Carlo collision simulation and experimental measurement of Ar plasma in a fast atom beam source for surface-activated bonding”, Japanese Journal of Applied Physics, Vol. 60, SCCB01 (2021), DOI: https://doi.org/10.35848/1347-4065/abe683
    4. Chiemi Oka, Kimihide Odagiri, and Hosei Nagano, “Nanoscale silica coating of porous stainless steel and its impact on water wettability”, Journal of Coatings Technology and Research, Vol. 18, pp. 601-609 (2021), DOI: https://doi.org/10.1007/s11998-020-00417-1

2020

    1. Takahiro Yamazaki, Kenichi Katabira, Fumio Narita, Yasubumi Furuya, and Wataru Nakao, “Microstructure-enhanced inverse magnetostrictive effect in Fe-Co alloy wires”, Advanced Engineering Materials, Vol. 22, 2000026 (2020), DOI:https://doi.org/10.1002/adem.202000026
    2. Ryo Morisaki, Yuuki Hirai, Chiemi Oka, Mizue Mizoshiri, Takahiro Yamazaki, Junpei Sakurai, Takami Hirai, Tomonori Takahashi, Hiroyuki Tsuji, and Seiichi Hata, “Development of a fast atom beam gun for surface-activated bonding”, Precision Engineering, Vol. 62, pp. 106-112 (2020), DOI: https://doi.org/10.1016/j.precisioneng.2019.11.006

2019

    1. Na Yang, Oka Chiemi, Seiichi Hata, and Junpei Sakurai, “Fabrication of Textured Substrates for Dye-sensitized Solar Cells Using Polydimethylsiloxane Nanoimprint Lithography”, Advanced Optical Technologies, Vol. 8 (2019), DOI: https://doi.org/10.1515/aot-2019-0010

Archives

    1. Yuko Aono, Junpei Sakurai, Tetsuo Ishida, Akira Shimokohbe and Seiichi Hata, “High-Throughput Time-Temperature-Transformation Diagram Measurement of Ni-Nb-Zr thin film amorphous alloys Using Temperature Gradient Heating System” Science and Technology of Advanced Materials (Submitting)
    2. Yuko Aono, Junpei Sakurai, Akira Shimokohbe, and Seiichi Hata, “Novel Thermographic Method for Characterizing Transformation Temperatures of Thin Film Shape Memory Alloys Aimed at Combinatorial Approach” Japanese Journal of Applied Physics (Reviced)
    3. Yuko Aono, Junpei Sakurai, Tetsuo Ishida, Akira Shimokohbe, and Seiichi Hata, “High-Throughput Measurement Method for Time-Temperature-Transformation Diagram of Thin Film Amorphous Alloys” Applied Physics Express 3 (2010) 125601.
    4. Junpei Sakurai, Mitsuhiro Abe, Masahiro Ando, Yuko Aono and Seiichi Hata; Searching for noble Ni-Nb-Zr thin film amorphous alloys for optical glass device molding die materials, Precision Engineering, (2010) (Accepted)
    5. Junpei Sakurai, Mitsuhiro Abe, Masayuki Ando and Seiichi Hata, Combinatorial searching for Ni-Nb-Zr amorphous alloys as glass lens molding die materials, Key Eng. Mater., 447-448, 661-665 (2010)
    6. Yuko Aono, Junpei Sakurai, Akira Shimokohbe and Seiichi Hata, High-throughput Evaluation of Crystallization Temperature of Pd-Cu-Si System Using Integrated Thin Film Samples, Materials Science Forum 654-656, 2426 (2010)
    7. Junpei Sakurai, Yuko Aono, Yui Ishida and Seiichi Hata, Characteristics of Ti-Ni-Zr Thin Film Metallic Glasses Exhibiting Shape Memory Effect After Crystallization, Materials Science Forum 654-656, 1066 (2010)
    8. Yuko Aono, Junpei Sakurai, Akira Shimokohbe, and Seiichi Hata, Evaluation of the validity of crystallization temperature measurements using thermograpy with different sample configurations, Jpn. J. Appl. Phys., 49, 076601 (7p) (2010)
    9. Junpei Sakurai, Seiichi Hata, Ryusuke Yamuchi, Mitsuhiro Abe, and Akira Shimokohbe, Searching for Pt-Zr-Ni Thin Film Amorphous Alloys for Optical Glass Lenses Molding Materials, Precision Engineering, 34, 431-439 (2010)
    10. Kee-Bong Choi, Jae Jong Lee, Seiichi Hata, A piezo-driven compliant stage with double mechanical amplification mechanisms arranged in parallel, Sensors and Actuators A 161, 173–181 (2010)
    11. 秦誠一,桜井淳平,阿部充博,安藤正将,青野祐子,下河辺明;ガラス成形金型用Ptフリーアモルファス合金のコンビナトリアル探索,日本機械学会論文集(C編), 76, 682-684 (2010)
    12. Sheng Wang, Dongming Sun, Seiichi Hata and Akira Shimokohbe, Driving mechanism, design, fabrication process and experiments of a cylindrical ultrasonic linear microactuator, IEEE Transactions on UFFC(Accepted).
    13. D. M. Sun, S. Wang, S. Hata, J. Sakurai, A. Shimokohbe, Theoretical and experimental investigation of the traveling wave propagation on a several-millimeter-long cylindrical pipe driven by piezoelectric ceramic tubes, IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 57 [7], 1600-1611 (2010)
    14. Dongming Sun, Sheng Wang, Seiichi Hata, Akira Shimokohbe, Axial vibration characteristics of a cylindrical, radially polarized piezoelectric transducer with different electrode patterns, Ultrasonics, Volume 50, Issue 3, Pages 403-410 (2010. 3)
    15. Dongming Sun, Sheng Wang, Junpei Sakurai, Kee-Bong Choi, Akira Shimokohbe, Seiichi Hata, A piezoelectric linear ultrasonic motor with the structure of circular cylindrical stator and slider, SMART MATERIALS AND STRUCTURES, Vol. 19, Issure 4, 045008 (9pp), (2010.2)
    16. 秦 誠一,藤田敏充,桜井淳平,下河辺明,単一アークプラズマガンを用いたコンビナトリアル蒸着法,材料, 58,[10],821-826 (2009)
    17. D. M. Sun, S. Wang, S. Hata, J. Sakurai, A. Shimokohbe, Cylindrical ultrasonic linear microactuator based on quasi-traveling wave propagation on a thin film metallic glass pipe supported by a piezoelectric ceramic tube, Sensors and Actuators, A: physical,156, 359–365 (2009.11.6)
    18. Sheng Wang, Dongming Sun, Seiichi Hata, Junpei Sakurai and Akira Shimokohbe, Fabrication of thin film metallic glass (TFMG) pipe for a cylindrical ultrasonic linear micro-actuator, Sensor and Actuator A Physical, Vol.153, pp.120-126 (2009)
    19. Dongming Sun, Sheng Wang, Junpei Sakurai, Kee-Bong Choi, Seiichi Hata and Akira Shimokohbe, “A traveling wave type of piezoelectric ultrasonic bidirectional linear microactuator”, Applied Physics Express, 2, 046503 (2009)
    20. Dongming Sun, Sheng Wang, Seiichi Hata, Junpei Sakurai and Akira Shimokohbe, Vibration characteristics of a cylindrical shell with 25 µm thickness fabricated by the rotating sputtering system, IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, Vol. 56, No. 3, March, 622-630 (2009)
    21. Seiichi Hata, Yuko Aono, Junpei Sakurai and Akira Shimokohbe, Measurement of Crystallization Temperature Using Thermography for Thin Film Amorphous Alloy Samples, Applied Physics Express, Vol. 2, No. 3, 036501 (2009)
    22. Junpei SAKURAI, Seiichi HATA and Akira SHIMOKOHBE, Characteristics of Cu-Zr Thin Film Metallic Glasses Fabricated by a Carousel-Type Sputtering System, Jpn. J. Appl. Phys.,48, 025503 (2009)
    23. Dongming Sun, Sheng Wang, Seiichi Hata, Junpei Sakurai and Akira Shimokohbe, Driving mechanism and experimental realization of a cylindrical ultrasonic linear microactuator, Microelectronic Engineering, Vol. 86, Issues 4-6, pp.1262-1266 (2009)
    24. Junpei Sakurai, Seiichi Hata, Ryusuke Yamauchi and Akira Shinokohbe, Characterization of the Pt-Hf-Zr-Ni Thin Film Amorphous Alloys for Precise Optical Glass Lens Mold, J. Solid Mechanics and Mat. Eng., 3, 1022-1032, (2009)
    25. Masaaki OTSU, Yuki IDE, Junpei SAKURAI Seiichi HATA and Kazyaki TAKASHIMA, Laser Forming of Thin Film Metallic Glass, Journal of Solid Mechanics and Materials Engineering, Vol.3, No. 2, 387- 395 (2009)
    26. 田邊力也, 秦 誠一, 下河辺 明,積層型MEMS血球分析チップの開発,精密工学会誌 ,74, [7],746-751 (2008)
    27. Seiichi Hata, Ryusuke Yamauchi, Junpei Sakurai and Akira Shimokohbe, Behavior of Joining Interface between Thin Film Metallic Glass and Silicon Nitride at Heating, Materials Science & Engineering B, 148, 149-153 (2008)
    28. Yuji Matsumoto, Miki Hiraoka, Masao Katayama, Seiichi Hata, Mikio Fukuhara, Takeshi Wada, Hisamichi Kimura and Akihisa Inoue, In situ analysis of the thermal behavior in the Zr-based multi-component metallic thin film by pulsed laser deposition combined with UHV-laser microscope system, Materials Science & Engineering B, 148, 179-182 (2008)
    29. 秦 誠一,桜井淳平,下河辺明,新しいPt基アモルファス合金を用いたガラスレンズ成形用金型の試作,日本機械学会論文集C編,74, [740],1020-1025 (2008)
    30. 山内隆介,秦 誠一,桜井淳平,下河辺明, ガラスレンズ成形金型用の新しいアモルファス合金のコンビナトリアル探索―結晶化開始温度,機械特性の評価―,精密工学会誌 ,74, [3],252-263 (2008)
    31. Seiichi Hata, Junpei Sakurai, Ryusuke Yamauchi and Akira Shimokohbe, Search for Novel Amorphous Alloys with High Crystallization Temperature by Combinatorial Arc Plasma Deposition, Applied Surface Science, 254, [3], 738-742 (2007)
    32. Junpei Sakurai, Seiichi Hata, Ryusuke Yamauchi and Akira Shimokohbe, Combinatorial Arc Plasma Deposition Search for Ru-based Thin Film Metallic Glass, Applied Surface Science, 254, [3], 720-724 (2007)
    33. Rikiya Tanabe, Seiichi Hata and Akira Shimokohbe, A Hemoglobin and Volum Measurement Sensor for Point of Care Testing Analyzer using MEMS Process, IEEJ Transactions on Sensors and Micromachines, 127, [5], 267-271 (2007)
    34. Junpei Sakurai Seiichi Hata, Ryusuke Yamauchi and Akira Shimokohbe, Searching for Novel Ru-Based Thin Film Metallic Glass by Combinatorial Arc Plasma Deposition, Jpn. J. Appl. Phys., 46, [4A], 1590-1595 (2007)
    35. Takashi Fukushige, Takehiko Hayashi, Seiichi Hata and Akira Shimokohbe, Built-in Capacitive Displacement Sensor with Long Full-Scale Range for Electrostatic Microactuators, IEEJ Transactions on Sensors and Micromachines. 126, [9], 522-527 (2006)
    36. Rikiya Tanabe, Seiichi Hata and Akira Shimokohbe, A MEMS complete blood count sensor with vanes for reduction in influence of electrolysis gas, IEEJ Transactions on Sensors and Micromachines, 126, [7], 297-301 (2006)
    37. Ryusuke YAMAUCHI, Seiichi HATA, Junpei SAKURAI and Akira SHIMOKOHBE, Combinatorial Search for Low Resistivity PdCuSi Thin Film Metallic Glass, Jpn. J. Appl. Phys., 45, [7], 5911-5919 (2006)
    38. Seiichi HATA, Ryusuke YAMAUCHI, Junpei SAKURAI and Akira SHIMOKOHBE, Combinatorial Arc Plasma Deposition of Thin Films, Jpn. J. Appl. Phys., 45, [4A], 2708-2713 (2006)
    39. Rikiya Tanabe, Seiichi Hata, Akira Shimokohbe, MEMS complete blood count sensors designed to reduce noises from electolysis gas, Microelectronic Engineering, 83, [4-9], 1646-1650 (2006)
    40. T. Fukushige, S. Hata, and A. Shimokohbe, A MEMS Conical Spring Actuator Array, IEEE/ASME Journal of Microelectromechanical Systems, 14, [2], 243-253 (2005)
    41. Yoshisato YOKOYAMA ,Takashi FUKUSHIGE, Seiichi HATA, Kazuya MASU and Akira SHIMOKOHBE: On-Chip Variable Inductor Using Microelectromechanical Systems Technology, Jpn. J. Appl. Phys., 42, 2190-2192 (2003)
    42. 秦 誠一,加藤友和,福重孝志,下河辺 明:集積化円すいばねマイクロアクチュエータ,精密工学会誌, 69, [3], 438-442,(2003)
    43. Takashi Fukushige, Yoshisato Yokoyama, Seiichi Hata, Kazuya Masu and Akira Shimokohbe: Fabrication and Evaluation of On-Chip Micro Variable Inductor, Microelectronic Engineering, 67-68, 582-587(2003)
    44. Hee-Won Jeong, Seiichi Hata and Akira Shimokohbe: Microforming of Three-Dimensional Microstructures from Thin Film Metallic Glass, IEEE/ASME Journal of Microelectromechanical Systems, 12, [1], 42-52 (2003)
    45. Kaiji Sato, Kentaro Ito, Seiichi Hata and Akira Shimokohbe: Self-alignment of microparts using liquid surface tension – behavior of microparts and alignment characteristics -, Precision Engineering, 27, 42-50(2003)
    46. 秦 誠一,下河辺明:薄膜金属ガラスアクチュエータ,精密工学会誌, 68, [5], 657-661(2002)
    47. 秦 誠一,劉 永東,和田晃一,下河辺明:薄膜金属ガラスの成膜と物性,精密工学会誌, 67, [10], 1708-1713(2001)
    48. YONGDONG LIU, SEIICHI HATA, KOUICHI WADA and AKIRA SHIMOKOHBE: Thermal, Mechanical and Electrical Properties of Pd-based Thin Film Metallic Glass, Jpn. J. Appl. Phys., 40, 5382-5388 (2001)
    49. 秦 誠一,劉 永東,長峯靖之,下河辺明:金属ガラスの精密・微細加工に関する基礎的研究(Zr基バルク金属ガラスの引張変形挙動),日本機械学会論文集C編, 67, [660], 313-318(2001)
    50. 早乙女康典,秦 誠一,坂口幸二:超塑性複合加工によるマイクロ2段歯車の創製,塑性と加工, 41, [468],49-53(2000)
    51. 佐藤海二, 関 智紀, 秦 誠一, 下河辺明: 液体の表面張力を利用したマイクロ部品のセルフアライメントの原理と特性, 精密工学会誌, 66, [2], 282-286(2000)
    52. 秦 誠一, 後藤 潤, 佐藤海二, 下河辺明: 薄膜金属ガラスを用いた微細構造物の製作-(第2報)薄膜金属ガラス静電マイクロアクチュエータの提案と試作-, 精密工学会誌, 66, [2], 287-291(2000)
    53. 秦 誠一, 後藤 潤, 佐藤海二, 下河辺明: 薄膜金属ガラスを用いた微細構造物の製作-(第1報)薄膜金属ガラスの製作と過冷却液体域を利用した微細成形-, 精密工学会誌, 66, [1], 96-101(2000)
    54. 秦 誠一, 山田典弘, 早乙女康典, 井上明久, 下河辺明: 金属ガラスの精密・微細加工に関する研究(Zr基金属ガラスの過冷却液体域における成形性), 日本機械学会論文集C編, 65, [633], 346-352(1999)
    55. 大塚二郎,秦 誠一, 下河辺明, 越水重臣: 延性モード切削加工用の超精密変位台の開発, 精密工学会誌, 64, [4], 546-551(1998)
TOP
Translate »